COMMERCIAL A/V & DATACOM SUPPLIER

☎ (858) 279 5800

Sidebar

Klein

Vendor:Klein Tools

Flex Bit Auger, 3/4" x 72"

Flex Bit Auger 3/4" x 72" Used to drill holes through wood within a wall. Tapered back for easy bit retrieval. Spring steel shaft resists deformation. Screw point tip pulls the bit through wood. Hole in tip allows for use with wire or cable...

$54.99
(Request Dealer Access to View Online Pricing)
Vendor:Klein Tools

Ship Auger Bit with Screw Point, 7/8" x 6"

The deep, open-throat design of the Ship Auger bit clears chips for faster, cleaner cuts. The shank is 7/16-Inch hex to fit 1/2-Inch (13 mm) and larger three-jaw chucks. Used for heavy construction and repair work in mines, on docks and bridges as well...

$26.99
(Request Dealer Access to View Online Pricing)
Vendor:Klein Tools

Steel Ship Auger Bit, Screw Point, 1" x 4"

The deep, open-throat design of the Ship Auger bit clears chips for faster, cleaner cuts. The shank is 7/16-Inch hex to fit 1/2-Inch (13 mm) and larger three-jaw chucks. Used for heavy construction and repair work in mines, on docks and bridges as well...

$30.99
(Request Dealer Access to View Online Pricing)
Vendor:Klein Tools

Ship Auger Bit with Screw Point, 3/4" x 6"

The deep, open-throat design of the Ship Auger bit clears chips for faster, cleaner cuts. The shank is 7/16-Inch hex to fit 1/2-Inch (13 mm) and larger three-jaw chucks. Used for heavy construction and repair work in mines, on docks and bridges as well...

$24.99
(Request Dealer Access to View Online Pricing)
Vendor:Klein Tools

Auger Drill Bit, 1 1/8" x 4"

The deep, open-throat design of the Ship Auger bit clears chips for faster, cleaner cuts. The shank is 7/16-Inch hex to fit 1/2-Inch (13 mm) and larger three-jaw chucks. Used for heavy construction and repair work in mines, on docks and bridges as well...

$39.99
(Request Dealer Access to View Online Pricing)
Vendor:Klein Tools

High Strength 1/8" Wide Steel Fish Tape - 240 ft

High strength 1/8" wide steel fish tape, 240 feetDurable, high-carbon strength 1/8-Inch wide steel fish tapes are firm yet flexible for long runs and large wire pullsCase design decreases payout effort and friction by optimizing the tape payout angle; slip-resistant geometry improves winding power...

$84.97
(Request Dealer Access to View Online Pricing)
Vendor:Klein Tools

High Strength 1/8" Wide Steel Fish Tape - 120 ft

High strength 1/8" wide steel fish tape, 120 feetDurable, high-carbon strength 1/8-Inch wide steel fish tapes are firm yet flexible for long runs and large wire pullsCase design decreases payout effort and friction by optimizing the tape payout angle; slip-resistant geometry improves winding power...

$56.97
(Request Dealer Access to View Online Pricing)
Vendor:Klein Tools

Hi-Flex Glow Rod Set, 18-Foot

Hi Flex glow rod set provides the ultimate in flexibility to navigate tight bends and narrow openingsProtective Splinter Guard™ coating keeps hands free of fiberglass splintersDurable stainless steel connectorsGlows in the dark to illuminate dark work spacesMade in USAThree 5/32-Inch (4 mm) diameter x...

$52.99
(Request Dealer Access to View Online Pricing)
Vendor:Klein Tools

Fish and Glow Rod Set, 25 Foot

Fish and glow rod set is extra durable, lightweight and available in a variety of lengths and flexibilitiesFive 1/4-Inch (6 mm) diameter fish rods and one 3/16-Inch (5 mm) diameter glow rod assemble to a full 25-feet (7.62 m)Five rods with durable 5/16-Inch diameter...

$49.49
(Request Dealer Access to View Online Pricing)
Vendor:Klein Tools

Hi-Flex Glow Rod w/Splinter Guard Coating, 6-Foot

5/32-inch diameter provides the ultimate in flexibility to navigate tight bends and narrow openingsProtective Splinter Guard™ coating keeps hands free of fiberglass splintersDurable stainless steel connectorsLuminescent glow for added visibilityMade in USABullet nose on each end to attach wires for fishing

$23.69
(Request Dealer Access to View Online Pricing)
Vendor:Klein Tools

Deluxe Fish Rod Set, 33-Foot, 19-Piece

Great cable pulling kit for typical renovation installationsSplinter resistant rods combine for a total length of 33-feet (10 m)Four rod flexibilities and seven innovative attachmentsDurable brass fittings on the end of each rod are mechanically crimped to carry a load of 550-pounds (250 kg)10...

$160.00
(Request Dealer Access to View Online Pricing)
Vendor:Klein Tools

Lo-Flex Fish Rod Set, 24-Foot

Four 1/4-Inch (6 mm) diameter x 6-foot (1.83 m) fish rods assemble to a full 24-feet (7.32 m)Thread sections together to customize length needed for your job - no tools neededDurable stainless steel connectorsProtective Splinter Guard™ coating keeps hands free of fiberglass splintersMade in...

$49.49
(Request Dealer Access to View Online Pricing)
Vendor:Klein Tools

WireSpanner Plus Telescopic Pole, 18 foot

Telescopic Pole extends to 18 feet and retracts to 32 inchesExtends to 18-feet in 10 secondsCompact design easily stores 32-Inches retractedQuick and easy extension with friction-twist lock design stays locked in place and will not spin loose or collapseLightweight resin with durable enamel protective...

$159.99
(Request Dealer Access to View Online Pricing)
Vendor:Klein Tools

Mid Flex Glow Rod, 30-Foot

Mid-Flex Fiberglass Glow Rods with Bullet Nose and Hook Attachments, 30 footMid-range flexibility for most fishing applicationsProtective Splinter Guard™ coating keeps hands free of fiberglass splintersDurable stainless steel connectorsGlows in the dark to illuminate dark work spacesThree 3/16" (5 mm) diameter x 5' (1.52m)...

$94.99
(Request Dealer Access to View Online Pricing)
Vendor:Klein Tools

Mega Fish Rod Kit, 52.5-Foot, 34-Piece

Great cable pulling kit for datacom/communication/safety installation as well as typical renovationsSplinter resistant rods combine for a total length of 52-Foot (16 m)Five rod flexibilities and fifteen innovative attachmentsDurable brass fittings on the end of each rod are mechanically crimped to carry a load...

$194.99
(Request Dealer Access to View Online Pricing)
Vendor:Klein Tools

MM325 Digital Multimeter, Manual Ranging

Digital Multimeter, Manual-Ranging, 600V Klein Tools MM325 Multimeter is a manual-ranging multimeter that measures AC/DC voltage, DC current, and resistance. It can also test batteries, diodes, and continuity. Klein Tools’ Test and Measurement product line was exclusively designed from the ground up by electricians...

$34.99
(Request Dealer Access to View Online Pricing)
Vendor:Klein Tools

AC Digital Clamp Meter, True RMS

$74.99
(Request Dealer Access to View Online Pricing)
Vendor:Klein Tools

MM450 Digital Multimeter, Auto Ranging, Temperature

Slim Digital Multimeter, TRMS Auto-Ranging, 600V, TempFeatures:Multimeter with automatic ranging true root mean square (TRMS) technology for increased accuracyMeasures up to 600V AC/DC voltage, 10A AC/DC current and 50 MO resistance, continuity, temperature, capacitance, frequency, duty-cycle, and test diodesHigh visibility, reverse contrast display with...

$74.97
(Request Dealer Access to View Online Pricing)
Vendor:Klein Tools

Digital Circuit Breaker Finder with CFCI Outlet Tester

Digital Circuit Breaker Finder with GFCI Outlet TesterQuickly and accurately locate the correct circuit breaker in a panel corresponding to the circuit to which an electrical outlet or fixture is connectedTester consists of two parts: a Transmitter, connected to the electrical outlet or fixture...

$49.99
(Request Dealer Access to View Online Pricing)
Vendor:Klein Tools

27-in-1 Tamperproof Screwdriver

Multi-Bit screwdriver features convenient on-board storage of 26 different tamperproof bits and a 1/4-Inch nut driverBarrel contains powerful rare earth magnets for securing bits and fastenersIndustrial-strength, double-sided bits that are conveniently housed in the handle eliminating the need for a bulky bit blockStainless steel...

$26.97
(Request Dealer Access to View Online Pricing)

Recently Viewed Products

Vendor

Example product title

(Request Dealer Access to View Online Pricing)

Vendor

Example product title

(Request Dealer Access to View Online Pricing)

Vendor

Example product title

(Request Dealer Access to View Online Pricing)

Vendor

Example product title

(Request Dealer Access to View Online Pricing)

Vendor

Example product title

(Request Dealer Access to View Online Pricing)

Vendor

Example product title

(Request Dealer Access to View Online Pricing)

Vendor

Example product title

(Request Dealer Access to View Online Pricing)

Vendor

Example product title

(Request Dealer Access to View Online Pricing)

Vendor

Example product title

(Request Dealer Access to View Online Pricing)

Vendor

Example product title

(Request Dealer Access to View Online Pricing)

General Returns:

Returns on normally stocked items need to be made within 30 days of receipt of merchandise either in person at one of our San Diego locations or by being shipped back to us at your expense. Returned merchandise should in original, unopened packaging including all original accessories and instructions. We will not take back merchandise that is not in original packaging, missing instruction manuals or accessories, serialized items not matching the serial number on the receipt, excessively worn packaging, abused, damaged from incorrect use, dented, or marred. Keep in mind that we need to be able to resell the item that is returned so keep this question in mind: “if you were buying this product, would you buy one in the condition of the product you are returning?”. We reserve the right to charge up to a 25% restocking fee for returned merchandise, we will contact you upon receipt of your returned goods if we feel a restocking fee is necessary. Most items that returned in new condition within the 30 day return period will not be subject to a restocking fee.

You must have an RMA# to return any merchandise. You will need to email or call us to obtain an RMA#. If any merchandise is sent back without an RMA# it may be refused or charged up to a 25% restocking fee.

Final Sales:

Certain items are not eligible for returns due to the nature of the products: Batteries, Tools, Test Equipment, Semi-Conductors, Capacitors, Cut-to-Order Items, & Chemicals.

Special Orders: Some special order items are final* depending on the product itself or the manufacturer’s return policy. If you want to return a special order, we can check with the manufacturer to see if it can be returned and if they charge a restocking fee. Please note that the manufacturers restocking fee is at their discretion and may exceed 25%.

All cut to order items such as wire & cable looms sales are final*, please make sure that you’re are ordering the correct type and length.

Tool and test equipment sales are final*, if you purchase a tool or piece of test equipment and realize it is not what you wanted call us IMMEDIATELY so we can help you get what you need.

*Sales deemed as "Final" are non-cancellable/non-refundable/non-exchangeable’

Defective Items:

In the unfortunate event that you receive an item that is defective, please contact us by email or phone as soon as possible so that we can help resolve the problem. Defective items will generally need to be returned to us for evaluation and then we will have a new replacement sent to you. If you need an advanced replacement, we would need to charge you for the new product upon shipping and provide a refund when the defective product is returned. For items purchased more than 90 days ago, you will typically need to contact the manufacturer for warranty directly. Depending on the type of sale, we may still retain a record of your receipt - if this is the case we can print a new copy for the warranty claim.

If the product being returned is not defective upon testing, it may be treated as a general return (refer to general return policy above).

Refused Deliveries or Invalid Delivery Addresses:

Any order that had an invalid shipping address provided to us or is refused at the shipping destination and sent back to us will be charged a 25% restocking fee and treated like an unauthorized RMA. If you are requesting that we re-deliver the package, you will be charged the new freight charge in addition to the original freight and restocking fee. The reason for this policy is that the shipping companies charge us for freight charges inbound, outbound, and an additional fee to have the part sent back to us on these types of shipments.