COMMERCIAL A/V & DATACOM SUPPLIER

☎ (858) 279 5800

Sidebar

Klein

Vendor:Klein Tools

Compact Pocket Knife

Compact folding pocket knifeSatin finish 440A stainless steel drop point bladeBlack aluminum handle for corrosion resistanceDual thumb studs for one-hand openBack lock secures blade in open positionPocket clip keeps knife readily availableLanyard hole allows knife to be tethered safely to prevent loss of knife...

$26.99
(Request Dealer Access to View Online Pricing)
Vendor:Klein Tools

Electrician's Stripping Notch Pocket Knife

Electrician's Pocket Knife with Wire Stripping Notch on the BladeWire stripping notches on blade, stripping sizes 14-10 AWGSatin 440A stainless steel drop point bladeAnodized aluminum handle for corrosion resistanceDual thumb studs for one-hand openLiner lock secures blade in open positionPocket clip keeps knife readily...

$24.99
(Request Dealer Access to View Online Pricing)
Vendor:Klein Tools

Bearing Assisted Open Pocket Knife

Bearing Assisted Open Pocket KnifeBearing-assisted opening mechanism enables a smooth, easy deployment of the bladeAmbidextrous flip lever for easy one finger openingStainless steel Tanto blade perfect for piercing and slicingLow-carry pocket clip allows the knife to sit low and out of the wayDurable, lightweight...

$31.99
(Request Dealer Access to View Online Pricing)
Vendor:Klein Tools

Replacement Blades for Klein 44218, 3 pack

Replacement Blades for Klein Knife #44218, 3 Pack

(Request Dealer Access to View Online Pricing)
Vendor:Klein Tools

Cable Splicer's Kit with Free-Fall Snip

Cable Splicer's Knife (Klein no. 44200), Free-Fall Snip (Klein no. 2101-0), Slotted Leather Holder (Klein no. 5187)Slotted leather holder fits belts up to 2'' (51 mm) wide.Free-Fall Snip has serrated teeth allowing for non-slip cutting action on 19 AWG and 23 AWG wire.Cable splicers...

$40.99
(Request Dealer Access to View Online Pricing)
Vendor:Klein Tools

13" Flexible Fish Tape Leader

13" Flexible Fish Tape Leader for use with 1/8" wide steel fish tapesFlexible leader guides steel tapes through 90° bends and makes pulling and pushing flat steel tapes easierThe 3/16'' diameter tape has a rustproof inner steel cable core wrapped with a spiral cover...

$19.99
(Request Dealer Access to View Online Pricing)
Vendor:Klein Tools

Glow-in-the-Dark Fiberglass Fish Tape - 20 ft

Klein Tools’ first fully glow-in-the-dark fish tape. The unique clear case permits ambient light to easily charge the glow tape and tip, providing a bright glow for use in low light. The fiberglass tape is fully removable from case for one-way wall cavity, drop...

$36.99
(Request Dealer Access to View Online Pricing)
Vendor:Klein Tools

Cable Lube, Synthetic Poly, 1 Quart

Wire and Cable Pulling Lubricant - Synthetic Polymer, One-Quart Squeeze Bottle Excellent all purpose lubricant for electrical and telecommunications and data applications. Easy-to-apply gel clings instantly to the cable and allows for easy handling and application. Compatible with most types of cable jackets, including...

$11.99
(Request Dealer Access to View Online Pricing)
Vendor:Klein Tools

Cable Lube, Clear Synthetic Poly, 1 Quart

Wire and Cable Pulling Lubricant - Clear Synthetic Polymer, One-Quart Squeeze Bottle Excellent all purpose lubricant for electrical and telecommunications and data applications. Designed for use primarily in finished workspaces (i.e. around painted walls and carpeted floors). The crystal clear formulation is easy to...

$16.99
(Request Dealer Access to View Online Pricing)
Vendor:Klein Tools

Foam Wire Pulling Lubricant, 19 ounces

Foam Wire Pulling LubricantNo mess formula stays where it is applied and wipes clean from hands and fabric4X greater yield than gel or wax lubricantsCoats better and is 30% more slippery than gel or wax lubricants

$21.99
(Request Dealer Access to View Online Pricing)
Vendor:Klein Tools

Zippered Canvas Bag

Canvas Zipper Bag No. 10 canvas bag with strong zipper. Convenient storage for pliers, wrenches and other tools. Depth/Height: 7"Length: 12-1/2"Manufacturer: Klein Tools

$11.99
(Request Dealer Access to View Online Pricing)
Vendor:Klein Tools

Canvas Bag, 4 Pack, Brown/Black/Gray/Red

Keep your tool bag organized with these zipper bags. The 4-pack comes in an assortment of colors for easy identification. Convenient storage for pliers, wrenches, screwdrivers, nut drivers, other tools and spare parts. Durable canvas and heavy-duty brass zipper ensure long life.Includes 4 assorted...

$39.97
(Request Dealer Access to View Online Pricing)
Vendor:Klein Tools

Tradesman Pro Hard Case, Medium

Tradesman Pro Hard Case, MediumHard shell protects tools, meters, small parts and tech devicesSoft interior lining with durable zipper closureOverall Length: 8-3/4" (222.3 mm)Overall Width: 6-1/2" (165.1 mm)Overall Height: 2-1/4"(57.2 mm)

$20.99
(Request Dealer Access to View Online Pricing)
Vendor:Klein Tools

Scissors and Cable Splice's Knife Holder

Designed to hold Klein Electrician's Scissors (Cat. No. 2100-5 or 2100-7) and Fits a Cable-Splicer's Knife (Cat. No. 44200)Stitched and riveted leather construction for long lifeSlotted to fit belts up to 2-1/4'' (57 mm) wide

$10.99
(Request Dealer Access to View Online Pricing)
Vendor:Klein Tools

Tradesman Pro Hard Case, Large

Tradesman Pro Hard Case, LargeHard shell protects tools, meters, small parts and tech devicesSoft interior lining with durable zipper closureOverall Length: 10- 1/4" (260.4 mm)Overall Width: 5-1/2" (139.7 mm)Overall Height: 2-1/4"(57.2 mm)

$24.99
(Request Dealer Access to View Online Pricing)
Vendor:Klein Tools

Tradesman Pro Maintenance Tool Pouch

Trademan's Pro Maintenance Tool Pouch with Easy Grab and Go StylingJust enough pockets for your essential toolsIncludes a tape thongTunnel loop fits 2 inch (51mm) belts10-1/4" long x 10-1/4" high x 5-1/2" wide (260.4mm x 260.4mm x 139.7mm)

(Request Dealer Access to View Online Pricing)
Vendor:Klein Tools

High Speed Drill Bit, 1/8", 118-Degree

High Speed Drill Bit, 1/8-Inch, 118-Degree53104Lightly roughened surface has higher lubricity for easier chip flowStandard jobber lengthBlack-oxide finish reduces chip weldingBit Size: 1/8-Inch; Flute Length: 1-5/8-Inch; Overall Length: 2-3/4-Inch; Weight: 0.01-Pound

$3.56
(Request Dealer Access to View Online Pricing)
Vendor:Klein Tools

High Speed Drill Bit, 1/2", 118-Degree

High Speed Drill Bit, 1/2-Inch, 118-Degree53128Lightly roughened surface has higher lubricity for easier chip flowStandard jobber lengthBlack-oxide finish reduces chip weldingBit Size: 1/2-Inch; Flute Length: 4-1/2"; Overall Length: 6"; Weight: 0.2-Pound

(Request Dealer Access to View Online Pricing)
Vendor:Klein Tools

Conical Anchor Kit, 100pcs

Conical Anchor Kit, 100 Anchors53729Kit contains: 100 #2 Phillips, #10 x 1-Inch Screws, and 100 conical anchors 1/4-Inch masonry drill bit also included Light-weight anchor holds screw securely in place For use on drywall or masonry

$10.99
(Request Dealer Access to View Online Pricing)
Vendor:Klein Tools

Adjustable Hole Saw with Dust Shield

The Adjustable Hole saw from Klein Tools quickly and smoothly cuts clean holes in drywall and ceiling tiles. Typical DIY and VDV applications include can lights, speaker holes and sprinkler systems. Blades adjust to cut holes from 2-Inch (51 mm) to 7-Inch (178 mm)...

$29.97
(Request Dealer Access to View Online Pricing)

Recently Viewed Products

Vendor

Example product title

(Request Dealer Access to View Online Pricing)

Vendor

Example product title

(Request Dealer Access to View Online Pricing)

Vendor

Example product title

(Request Dealer Access to View Online Pricing)

Vendor

Example product title

(Request Dealer Access to View Online Pricing)

Vendor

Example product title

(Request Dealer Access to View Online Pricing)

Vendor

Example product title

(Request Dealer Access to View Online Pricing)

Vendor

Example product title

(Request Dealer Access to View Online Pricing)

Vendor

Example product title

(Request Dealer Access to View Online Pricing)

Vendor

Example product title

(Request Dealer Access to View Online Pricing)

Vendor

Example product title

(Request Dealer Access to View Online Pricing)

General Returns:

Returns on normally stocked items need to be made within 30 days of receipt of merchandise either in person at one of our San Diego locations or by being shipped back to us at your expense. Returned merchandise should in original, unopened packaging including all original accessories and instructions. We will not take back merchandise that is not in original packaging, missing instruction manuals or accessories, serialized items not matching the serial number on the receipt, excessively worn packaging, abused, damaged from incorrect use, dented, or marred. Keep in mind that we need to be able to resell the item that is returned so keep this question in mind: “if you were buying this product, would you buy one in the condition of the product you are returning?”. We reserve the right to charge up to a 25% restocking fee for returned merchandise, we will contact you upon receipt of your returned goods if we feel a restocking fee is necessary. Most items that returned in new condition within the 30 day return period will not be subject to a restocking fee.

You must have an RMA# to return any merchandise. You will need to email or call us to obtain an RMA#. If any merchandise is sent back without an RMA# it may be refused or charged up to a 25% restocking fee.

Final Sales:

Certain items are not eligible for returns due to the nature of the products: Batteries, Tools, Test Equipment, Semi-Conductors, Capacitors, Cut-to-Order Items, & Chemicals.

Special Orders: Some special order items are final* depending on the product itself or the manufacturer’s return policy. If you want to return a special order, we can check with the manufacturer to see if it can be returned and if they charge a restocking fee. Please note that the manufacturers restocking fee is at their discretion and may exceed 25%.

All cut to order items such as wire & cable looms sales are final*, please make sure that you’re are ordering the correct type and length.

Tool and test equipment sales are final*, if you purchase a tool or piece of test equipment and realize it is not what you wanted call us IMMEDIATELY so we can help you get what you need.

*Sales deemed as "Final" are non-cancellable/non-refundable/non-exchangeable’

Defective Items:

In the unfortunate event that you receive an item that is defective, please contact us by email or phone as soon as possible so that we can help resolve the problem. Defective items will generally need to be returned to us for evaluation and then we will have a new replacement sent to you. If you need an advanced replacement, we would need to charge you for the new product upon shipping and provide a refund when the defective product is returned. For items purchased more than 90 days ago, you will typically need to contact the manufacturer for warranty directly. Depending on the type of sale, we may still retain a record of your receipt - if this is the case we can print a new copy for the warranty claim.

If the product being returned is not defective upon testing, it may be treated as a general return (refer to general return policy above).

Refused Deliveries or Invalid Delivery Addresses:

Any order that had an invalid shipping address provided to us or is refused at the shipping destination and sent back to us will be charged a 25% restocking fee and treated like an unauthorized RMA. If you are requesting that we re-deliver the package, you will be charged the new freight charge in addition to the original freight and restocking fee. The reason for this policy is that the shipping companies charge us for freight charges inbound, outbound, and an additional fee to have the part sent back to us on these types of shipments.