DIY - Circuit Boards
Breadboard, 2860 Tie Points
Experimenters breadboard for prototyping and development.
2860 Tie Points
7.9" wide x 9.5" length
Compatible with 20-29 awg wire
Durable Formed Metal Contacts
$24.99
Breadboard, 830 Tie Points Kit
Experimenters breadboard for prototyping and development. 830 Tie Points 2.2" wide x 6.5" height Compatible with 20-29 awg wire 65pc jumper wire set Power module 6.5-12VDC voltage input, USB output, 3.3 or 5V output (w/ 12VDC input) - 700mA max...
$10.99
Breadboard Jumpers, 65pcs
Experimenters breadboard jumper set
65 Total Jumpers
49pcs - 4.7"
8pcs - 6.3"
4pcs - 7.9"
4pcs - 9.4"
$5.89
Breadboard, 400 Tie Points
Experimenters breadboard for prototyping and development.
400 Tie Points
2.2" wide x 3.3" height
Compatible with 20-29 awg wire
Tin Phosphor Bronze Contacts
$5.99
Mini Prototype Board, 1.8" x 3.6"
Mini Phenolic Prototype Board, 1.8" x 3.6"Small general purpose phenolic prototype board measures 1.8" wide by 3.6" long. The board is made of two smaller, identical boards that are scored to easily break-apart when only a very small board is...
$3.59
Experimenter's Prototype Board, 1.4" x 3.6"
I.C. Experimenter's Phenolic Prototype Board, 1.4" x 3.6"Small Phenolic IC protoboard is 1.8" wide and 3.6" long. The board accommodates standard DIP (dual inline) IC's. Two smaller, identical boards are scored and will easily break-apart when only a very small...
$2.39
Experimenter's Prototype Board, 1.7" x 2.9" Common Traces
Experimenter's Phenolic Prototype Board, 1.7" x 2.9" with Common TracesSmall phenolic protoboard is 1.7" wide by 2.9" long. Features drilled copper pads connected via traces in groups of two and three. A general purpose small board can accommodate transistors and...
$2.29
Experimenter's Prototype Board, 3 15/16" x 6 15/16"
Experimenter's Prototype Board, 3 15/16" x 6 15/16"Copper strips on one side, 0.40" diameter holes are on 0.10" centers to accept common component leads. The strips run full length but user may break them up using an exacto knife. These...
$4.59
Copper Clad PC Board, 2"x4" Single Sided
Single-Side Copper Clad Board. PCB Size: 2" x 4" PCB Thickness: 1/16" Substrate: FR4 Copper Surface: 1 oz (0.0014")
$1.69
Copper Clad PC Board, 8"x10" Double Sided
Double-Sided Copper Clad Board. PCB Size: 8" x 10" PCB Thickness: 1/16" Substrate: FR4 Copper Surface: 1 oz (0.0014"), each side
$9.19
Copper Clad PC Board, 6" x 9" x 1/32" Single Sided
Single-Side Thin Copper Clad Board. PCB Size: 6" x 9" PCB Thickness: 1/32" Substrate: FR4 Copper Surface: 1 oz (0.0014")
$7.99
Experimenter's Prototype Board, 1.9" x 5.1"
Experimenter's Phenolic Prototype Board, 1.9" x 5.1"Medium sized phenolic protoboard is 5.16" by 1.90". This board is large enough to accommodate circuits containg several IC's. Forty-five rows of holes are set up so that IC's can straddle the center of...
$2.79
Printed Circuit Board, 4" x 9", 1.2mm Hole/Grids
4" x 9" PC Board: 1.2mm hole/grids2mm square solder pad/hole etched one side
$7.99
Printed Circuit Board, 3" x 3", 1.2mm Hole/Grids
3" x 3" PC Board: 1.2mm hole/grids2mm square solder pad/hole etched one side
$2.99