Wiring - Fuse Holder
Fuse Holder for 3AG Fuses
Screw cap fuse holder rated at 15A @ 250VAC. Holds 1/4" x 1 1/4" fuses. Can be used in panels up to 1/4" thick. Mounts in 19/32" hole.
$4.29
Fuse Holder for ATC/ATO Type Fuses
ATC/ATO Fuse HolderWeather resistantNylon body with latching capRubber seal protects fuses12AWG, 3 to 30 Amp
$2.99
Blue Sea ST Blade Compact Fuse Block - 4 Circuits
Provides surface mount circuit protection for ATO®/ATC® Fuses in a compact footprint.Ignition protected when cover is secure –meets ISO 8846 and SAE J1171 for use in a gasoline engine compartmentSingle side design allows wire entry from one side to minimize...
$26.29
Add-A-Circuit Plug-In Fuse Tap, Holds ATC/ATO Fuses
Add-A-CircuitPlug into an existing fuse block - provides one fuse to protect the original ciruitUse wire lead for new circuit - second fuse protects new circuitRed 16 AWG wire - #16-14 AWG butt connector - 10 Amp at 12V
$5.59
Add-A-Circuit Plug-In Fuse Tap, Holds ATM Mini Fuses
Add-A-CircuitPlug into an existing fuse block - provides one fuse to protect the original ciruitUse wire lead for new circuit - second fuse protects new circuitRed 16 AWG wire - #16-14 AWG butt connector - 10 Amp at 12V
$4.99
Fuseholder, For GMA Type Fuse
Fuseholder for GMA fuses (5mm x 20mm). Screw cap, panel mount.
$2.98
Fuseholder, For 3AG Type Fuse
Fuseholder for 3AG fuses (1/4" x 1 1/4"). Screw cap, panel mount.
$2.98
Inline Fuseholder, MAXI Blade Type, 8 AWG
Fuse Holder - InlineThese fuse holder are made to fit a Maxi type fuse. In order to use them, you cut the wire then splice one side to the source and the other side to the load. The fuse holder...
$4.49
Inline Fuseholder, ATC/ATO Blade Type, 10 AWG
Fuse Holder - InlineThese fuse holder are made to fit a ATC/ATO type fuse. In order to use them, you cut the wire then splice one side to the source and the other side to the load. The fuse holder...
$2.69
Inline Fuseholder, ATC/ATO Blade Type, 18 AWG
Fuse Holder - InlineThese fuse holder are made to fit a ATC/ATO type fuse. In order to use them, you cut the wire then splice one side to the source and the other side to the load. The fuse holder...
$1.69
Inline Fuseholder, ATC/ATO Blade Type, 12 AWG
Fuse Holder - InlineThese fuse holder are made to fit a ATC/ATO type fuse. In order to use them, you cut the wire then splice one side to the source and the other side to the load. The fuse holder...
$1.99
Inline Fuseholder, ATC/ATO Blade Type, 14 AWG
Fuse Holder - InlineThese fuse holder are made to fit a ATC/ATO type fuse. In order to use them, you cut the wire then splice one side to the source and the other side to the load. The fuse holder...
$1.79
Inline Fuseholder, ATC/ATO Blade Type, 16 AWG
Fuse Holder - InlineThese fuse holder are made to fit a ATC/ATO type fuse. In order to use them, you cut the wire then splice one side to the source and the other side to the load. The fuse holder...
$1.49
Inline Fuseholder, ATM Mini Blade Type, 12 AWG
Fuse Holder - InlineThese fuse holder are made to fit a ATM type fuse. In order to use them, you cut the wire then splice one side to the source and the other side to the load. The fuse holder...
$1.99
Inline Fuseholder, ATM Mini Blade Type, 16 AWG
Fuse Holder - InlineThese fuse holder are made to fit a ATM type fuse. In order to use them, you cut the wire then splice one side to the source and the other side to the load. The fuse holder...
$1.79
Inline Fuseholder, 3AB/3AG, 18 AWG
Fuse Holder - InlineThese fuse holder are made to fit a 3AG / 3AB type fuse. In order to use them, you cut the wire then splice one side to the source and the other side to the load. 18...
$1.19
Fuse Block, 6 Circuit, 10 AWG Lead
ATC Auxiliary Fuse BlockThis fuse block has a pre-terminated 23" long input wire, to make the installation easier. It allows for 6 separate fuse circuits to be connected using ATC type blade fuses. It has elevated mounting legs to prevent...
$16.99
Inline Fuseholder for 8 / 4 AWG Wire
Fuse HolderThis inline fuse holder can be surface mounted and accepts AGU type fuses up to 80A Specifications:
Max Wire Size: 4 AWG (8 AWG with Reducers)
Max Amperage: 80A
Connections: Hex Set Screw
$7.99
ATC/ATO Fuse Tap, 4 pack
ATC/ATO Fuse Taps, 4 packBrass .250" Male TabSnaps over Blade FusesFuse not included
$2.99
Add-A-Circuit Plug-In Fuse Tap, Holds ATC/ATO Fuses
Add-A-CircuitPlug into an existing fuse block - provides one fuse to protect the original ciruitUse wire lead for new circuit - second fuse protects new circuitRed 16 AWG wire - #16-14 AWG butt connector - 10 Amp at 12V
$3.99
Add-A-Circuit Plug-In Fuse Tap, Holds ATM Mini Fuses
Add-A-CircuitPlug into an existing fuse block - provides one fuse to protect the original ciruitUse wire lead for new circuit - second fuse protects new circuitRed 16 AWG wire - #16-14 AWG butt connector - 10 Amp at 12V
$3.99
Add-A-Circuit Plug-In Fuse Tap, Holds Low Profile Fuses
Add-A-CircuitPlug into an existing fuse block - provides one fuse to protect the original ciruitUse wire lead for new circuit - second fuse protects new circuitRed 16 AWG wire - #16-14 AWG butt connector - 10 Amp at 12V
$4.79
Add-A-Circuit Plug-In Fuse Tap, Holds Micro 2 Fuses
Add-A-CircuitPlug into an existing fuse block - provides one fuse to protect the original ciruitUse wire lead for new circuit - second fuse protects new circuitRed 16 AWG wire - #16-14 AWG butt connector - 10 Amp at 12V
$3.89
Fuse Block for ATC/ATO Type Fuses, 6 Position
Fuse block holds 6 ATC/ATO type fuses #10 stud hot feed terminal 4 mounting holes for #10 screws 6 .250" male tabs6 recessed fuse contacts - no cover required 25 Amp circuit Block max 150 Amp at 12 VDC
$18.99
In-Line Fuse Holder, AGC Type, #16AWG
In-Line fuse holder with universal nylon body for AGE and JSO glass fuses. Black #16AWG wire, 15 amp.
$1.69
Fuse Holder, ATC Six Way Quick Connect with Cover and Link
The BEP ATC Fuse Holder provides compact, easy access to fuses with the design integrity only BEP can offer.Maximum Amperage Per Circuit: 30 AmpsMaximum Amperage Per Block: 100 Amps
$36.79
Blue Sea ST Blade Compact Fuse Block- 8 Circuits
Provides surface mount circuit protection for ATO®/ATC® Fuses in a compact footprint.Ignition protected when cover is secure –meets ISO 8846 and SAE J1171 for use in a gasoline engine compartmentSingle side design allows wire entry from one side to minimize...
$41.89
ATC Type Fuse Block With Cover 6 Circuit With Cover
ATC Type Fuse Block With Cover 6 Circuit With Cover6 Circuits Uses ATC Type Fuses15 Amp per Circuit MAXIMUM.250" Tab TerminalsWater Resistant Cover with Rubber SealFuses NOT IncludedProduct Manufacturer: K-Four
$13.69
ATC Type Fuse Block With Cover (4 Circuit)
ATC Type Fuse Block With Cover 4 Circuit With Cover4 Circuits Uses ATC Type Fuses15 Amp per Circuit MAXIMUM.250" Tab TerminalsWater Resistant Cover with Rubber SealFuses NOT IncludedProduct Manufacturer: K-Four
$12.99
ATC Type Fuse Block W/O Ground, 12 Position
ATC Type Fuse Block With Cover 12 Circuit W/O Ground12 Circuits plus 12 Distribution TerminalsUses ATC Type Fuses30 Amp per Circuit100 Amp per Fuse BlockFuses NOT IncludedProduct Manufacturer: K-Four
$55.92
ATC Type Fuse Block W/Cover 12 Position
ATC Type Fuse Block With Cover 12 Circuit12 Circuits plus 12 Distribution TerminalsUses ATC Type Fuses30 Amp per Circuit100 Amp per Fuse BlockFuses NOT IncludedProduct Manufacturer: K-Four
$60.47
ATC Type Fuse Block W/Ground, 6 Position
ATC Type Fuse Block With Cover 6 Circuit6 Circuits plus 6 Distribution TerminalsUses ATC Type Fuses30 Amp per Circuit100 Amp per Fuse BlockFuses NOT IncludedProduct Manufacturer: K-Four
$49.27
Crankin' Power In-Line ANL Fuse Holder, up to 1/0 AWG
Crankin' Power In-Line ANL Fuse Holder, up to 1/0 AWG
$24.95
Pre-Wired Bakelite Fuse Holder, 8 AWG
Fuse Holder - InlineThese fuse holders are made to fit a AGU type fuse. In order to use them, you cut the wire then splice one side to the source and the other side to the load. 8 AWG Wire...
$4.99